Kikusui PLZ-3WH Series, Operation Manual

Page: 121 / 172

5-21
Chapter 5: Remote Control
Table 5.3-8
Header Data Action Backup
PROGRAM 1 - 16 Specifies the program number (the program number is valid for
the STEP and EOS commands thereafter.)
PROGRAM? Returns the specified program number.
EOS 1 - 1024 Sets the final step number of the specified program. (The data can
be omitted.)
EXECUTE 1 (ON) Selects the execution mode to enable the RUN, STOP, and
PAUSE keys.
0 (OFF) Cancels the execution mode.
RUN 1 - 8 Executes the sequence having the specified number.
PAUSE 1 (ON) Pauses the sequence operation.
0 (OFF) Removes the pause from the sequence operation.
STOP Ends the sequence operation forcibly.
RUNNING? Returns the sequence execution status information.
<1 - 3>,<SEQ.NO>,<PROG.NO>,<STEP.NO>,<LOOP>
1......STOP
2......RUN
3......PAUSE
SEQMOD? Returns the sequence mode information.
1: NV mode
2: NI mode
4: NR mode
5: NP mode
11: FI mode
12: FR mode
TEXTIDX Character string Adds an index of up to 6 characters to the sequence execution
memory.
TEXTSEQ
①
1 - 8 Specifies the sequence number.
② Character Adds a comment of up to 6 characters to the specified sequence
string number.
TEXTPROG
③
1 - 16 Specifies the program number.
④ Character Adds a comment of up to 6 characters to the specified program
string number.
Available
Available
Available
None
None
None
None
None
None
None
None
None