Kikusui PLZ-3WH Series, Operation Manual

Page: 77 / 172

4-37
Chapter 4: Operating Procedure
4.5.2 Outline of Sequence Operation Setup
To set the sequence operation, sequence file management is required, along with creation and editing of sequence
parameters. For information on this setup procedure, see Section 4.5.3, “Sequence Operation Setup Procedure”.
● ●
● ●
● Sequence operation setup menu
The menu used to set the sequence operation has the following contents.
Sequence Menu
1: Edit Edit Menu
1: Edit Program Adds, inserts, changes, and deletes programs of the sequence execution memory.
2: Edit Sequence Creates and edits parameters for the sequence execution memory.
3: New Initializes the sequence execution memory.
2: Run Execution Menu
Executes the sequence execution memory.
● ● ● ● ● Sequence operation scheme
The following illustration shows a schematic figure of the sequence operation. For the setup procedure, see Section
4.5.3, “Sequence Operation Setup Procedure”.
Edit
RUN
Sequence
Program
New
[STOP]
[PAUSE] ,
TRIG IN
[RUN]
[PAUSE]
[STOP]
Sequence execution memory
(backed up by batteries)
Execution data
Sequence is executed.
Sequence is
complete.
Sequence is paused.
Data are converted.
Fig. 4.5-11