14
PCR-LE2 series
环境保护使用期限
Environment-friendly Use Period
该标记为适用于在中华人民共和国销售的电子信息产品的环境保护使
用期限。
只要遵守有关该产品的安全及使用注意事项，从制造年月起计算，在
该年度内，就不会对环境污染、人身、财产产生重大的影响。
产品的废弃请遵守有关规定。
产品的制造年月可以在以下网址中确认。
http://www.kikusui.co.jp/pi/
This mark is used to indicate the period as Environment-friendly use pe-
riod that applies to any of the Electronic Information Products sold in the
People’s Republic of China.
If you carefully observe the precaution of Safety and Usage for this prod-
uct, no serious effect will be made to the environment, human body or
property during the period of the specified number of years from the manu
-
facturing month/year of the product.
In case the product is disposed, please ensure to comply with the law or
regulation of local government in your region.
To check the manufacturing month/year of the product, visit the following
website.
http://www.kikusui.co.jp/pi/
毒有害物质或元素名称及含有标示
Name of hazardous materials and symbol of element in the equipment and
quantity
部件名称
Name of part
有毒有害物质或元素
Hazardous material and symbol of element
铅
Pb
汞
Hg
镉
Cd
六价铬
Cr(VI)
多溴联苯
PBB
多溴二苯醚
PBDE
印刷电路板组装品
Printed circuit board assem-
blies
×
○
○
○
○
○
显示器
Display
×
○
○
○
○
○
内部接线
Internal wirings
○
○
○
○
○
○
外壳
Enclosure
×
○
○
○
○
○
底盘组装品
Chassis assembly
×
○
○
○
○
○
辅助设备
Accessories
○
○
○
○
○
○
○
:
该部件所有均质材料的有毒有害物质的含量不超过
SJ/T11363-2006
标准所规定的
极限值要求。
×
:
该部件至少有一种均质材料的有毒有害物质的含量超过
SJ/T11363-2006
标准所规
定的极限值要求。
○
: The content of toxic and hazardous substances or elements from the homogeneous
materials used in all appliance components does not exceed the limit defined in the SJ/
T11363-2006 standard.
×
: The content of toxic and hazardous substances or elements from the homogeneous ma-
terials used in at least one of the applicable components does exceed the limit defined in
the SJ/T11363-2006 standard.
The PCR-LE2 series is subject to export control laws.
Trademarks
All company names and product names used in the PCR-LE2
manual are trademarks or registered trademarks of their respective
companies.
Copyrights
The contents of the PCR-LE2 manual may not be reproduced, in
whole or in part, without the prior consent of the copyright holder.
The specifications of this product and the contents of this manual
are subject to change without prior notice.
Connecting to the front-panel outlets
(PCR6000LE2/ PCR9000LE2 only)
The PCR-LE2 Series can generate power from the OUTPUT termi-
nal block on the rear panel and the outlets on the front panel.
The outlets on the front panel are valid for single-phase output.
Electric current does not flow through the outlets during single-
phase three-wire output or three-phase output.
The specifications of the front-panel outlets are not regulated. Their
performance may decrease.
CAUTION
The maximum rated voltage of the front-panel outlets is 250
Vac.
Max. output voltage: 250 Vac(rms)
Maximum output current: 10 Aac (rms) per outlet
Do not disconnect the load when the maximum rated voltage
of the outlets has been exceeded or in DC mode. Doing so
may cause the product to malfunction.
On the PCR-LE2 Series, if an overcurrent is detected, the breaker
trips, and the output is cut off.
The outlets are designed for power plugs like those shown below.
NEMA5-15
NEMA1-15
1
Turn the POWER switch off.
2
Connect the power cord of the load device to a front-
panel outlet.
