PCR-LE2 series
7
Connecting the power cord
Connecting power cords to the PCR12000LE2, PCR18000LE2, or PCR27000LE2
1
Check that the AC power line meets the nominal in-
put rating of the product.
The product can receive a nominal power supply voltage:
Three-phase 200 V input: 200 Vac to 240 Vac (Line Voltage)
Three-phase, 400 V input: 220 Vac to 240 Vac (Phase Voltage)
Frequency: 50 Hz or 60 Hz.
2
Check that the POWER switch is turned off.
3
Unfasten the screws (two locations) of the AC INPUT
terminal block cover, and remove the cover.
4
Connect the power cords according to the indica-
tions on the terminal block.
M8
M8
T
S
R
Three-phase
200 V input
Three-phase
400 V input
N T
S
R
5
Turn off the switchboard’s breaker.
6
Securely connect the power codes to corresponding
terminals of switchboard's breaker.
7
Fasten the cover that you removed in step 3 with the
screws (two locations).
8
Turn on the switchboard’s breaker.
