42
PAV LAN
LAN Commands
LAN commands are listed below. For details on other commands, see the USB/RS232/
RS485 Communication Interface Manual.
SYST:COMM:LAN:HOST?
Queries the host name.
Command
SYSTem:COMMunicate:LAN:HOST?
Ex.
SYST:COMM:LAN:HOST?
Response
Returns the host name in CRD format in response to SYST:COMM:LAN:HOST?. A host
name can be up to 16 characters in length.
SYST:COMM:LAN:IP?
Queries the IP address.
Command
SYSTem:COMMunicate:LAN:IP?
Ex.
SYST:COMM:LAN:IP?
Response
Returns the IP address in CRD format in response to SYST:COMM:LAN:IP?. An IP address
can be up to 15 characters in length.
SYST:COMM:LAN:MAC?
Queries the MAC address.
Command
SYSTem:COMMunicate:LAN:MAC?
Ex.
SYST:COMM:LAN:MAC?
Response
Returns the MAC address in CRD format in response to SYST:COMM:LAN:MAC?. A MAC
address can be up to 17 characters in length.
SYST:COMM:LAN:RES
Resets the LAN settings to their factory default values. As sending this command also
changes the IP address and host name, the LAN connection will become invalid. Therefore,
use this command only for diagnosis purposes.
After sending this command, you may need to restart the PAV.
Command
SYSTem:COMMunicate:LAN:RESet
Ex.
SYST:COMM:LAN:RES
SYST:COMM:LAN:IDLE
Sets the PAV identification LED to blinking mode.
Command
SYSTem:COMMunicate:LAN:IDELd <bool>
Parameter Value ON
(1)
OFF (0)
Ex.
SYST:COMM:LAN:IDEL 1
