PAV LAN
23
3. Webpage
DC Power Page
4
Measurement
(output status display)
Displays the selected PAV’s voltmeter, ammeter, and operation mode
(Voltage CV: constant voltage, Constant CC: constant current, or
OFF).
When an error occurs, the voltmeter shows the status.
5
Settings
“Voltage Limit” is for setting the CV voltage, and “Current Limit” is for
setting the CC current. “Output” is for turning the output on and off.
This area shows the present PAV settings.
To change the settings, select the Check To Modify check box, enter
values, and click Apply.
To view the settings, clear the Check To Modify check box.
1
To stop the blinking of the PAV’s identification LED (green), execute one of the following steps.
• Click Blink Identify again.
• Turn a setting knob or key on the PAV front panel.
• Send an SCPI command.
No. Item
Description
