Keysight U8903B, User Manual

Page: 506 / 605

A Appendixes
506 Keysight U8903B User’s Guide
Phase
Table A-17 Measurement settings > Phase menu tree description
Tab Level 1 Level 2 Level 3 Description
Phase
(Signal Generation)
Waveform
– Sine
– Variable Phase
– Square
– Arbitrary
Select the waveform type.
Output Select the output channel.
Waveform Config Track 1st Ch
– Enable
– Disable
Enable or disable the tracking of the first channel.
Waveform Config
Frequency Set the frequency value.
Amplitude Set the amplitude value.
DC Offset Set the DC offset value.
Phase->1st Ch
Set the phase value. This setting is only available
when channel 2 is selected.
Phase
(Signal Analysis)
Ref Channel Set the reference channel number.
Sample Size
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
Select the number of samples to be acquired for
the measurement.
Input Range
Track 1st Ch
– Enable
– Disable
Enable or disable the tracking of the first channel.
Voltage Range Set the input voltage range.
Phase
Refer to “ Bar chart ” on page 548 for the bar
chart menu tree.