Keysight U8903B, User Manual

Page: 427 / 605

Appendixes A
Keysight U8903B User’s Guide 427
System
HP8903B Config
Active Channel
– 1
– 2
Select the HP8903B active channel.
Left Filter
– None
– A-Weighing
– CCIR 1k wtd
– CCIR 2k wtd
– C-Message
– CCITT
– 400 Hz
Select the left filter type.
Right Filter
– None
– A-Weighing
– CCIR 1k wtd
– CCIR 2k wtd
– C-Message
– CCITT
– 400 Hz
Select the right filter value.
Default LPF
– None
– 30 kHz
– 80 kHz
Select the default filter for the HP8903B mode.
Fan & Temperature
Display the temperatures of the available cards
and the speed of the three 80 mm fans in the
U8903B.
Aux Output
Audio Monitor
– On
– Off
Enable or disable the aux audio monitor.
Audio Output
– Speaker
– Phone
Select the aux audio output type.
Audio Mode
– Stereo
– Mono This is only available when audio output is Phone.
Select the aux audio mode type.
Volume 0 to 100 Select the aux audio volume.
DC Output Set the aux DC output value.
Board Info Display the U8903B available cards information.
Legacy Status
– On
– Off
Enable or disable the legacy sweep.
Macro
( Shift + System )
Reserved for future expansion.
Local
Switch from remote control mode to local mode.
The front panel keys are locked in the remote
mode.
Lock/Unlock
Lock or unlock the front panel keys in the local
mode.
A dialog box will pop-up for confirmation.
Table A-3 SYSTEM panel menu tree description (continued)
Key Level 1 Level 2 Level 3 Description