Keysight U8903B, User Manual

Page: 125 / 605

Audio Generator Functions 3
Keysight U8903B User’s Guide 125
Figure 3-38 Bluetooth Generator > Waveform Config menu page (sine burst)
Table 3-16 Analog/Digital/ Bluetooth Generator > Waveform Config menu description (sine burst)
Menu Description
Amplitude
Amplitude can be expressed as Vrms, Vpeak, Vpp, dBV, dBu, and dBm for the analog generator.
Amplitude can be expressed as FFS, dBFS, or %FS for the digital and
Bluetooth generator.
For a perfect sine waveform without any DC offset, Vpp is twice Vpeak, and Vrms is equivalent to Vpeak/
√
2.
Frequency Frequency refers to the frequency for the first sine component.
DC Offset
This is only available for the analog and Bluetooth generator.
DC Offset refers to the DC component of the waveform.
Burst On
Burst On refers to the number of cycles at which the signal amplitude will be at the higher level. The Burst On value must
be less than the period value by one cycle.
Period
Period refers to the number of cycles from the beginning of one burst to the beginning of the next burst. The period value
must be at least one cycle greater than the burst on.
Low Level Low Level refers to the amplitude ratio of Burst On over Burst Off.