Keysight M9484C, Getting Started And Troubleshooting Manual

Page: 62 / 141

62 M9484C Startup Guide
Front and Rear Panel Features
Front Panel Features
Two Channel, 31.8 GHz, 44 GHz, or 54 GHz
For M9484C Option 001 + 002, Option 532 or 544 or 554
Item Connector Type
Description
# Name
1 System Sync Up Reserved for future use
2 System Sync Down Reserved for future use
3 SS - USB 3.0 USB Type-A
female Host controller, SuperSpeed, 900 mA (nominal)
4 USB-C PD USB Type-C
female USB 3.0 Type C. Provides power and digital control to the V3080A
Vector Signal Generator Frequency Extender. The front panel USB
3.0 Type C connectors do not have USB-compliant pin
configurations. Do not use these ports for any USB devices as
damage may occur.
5
2.4 GHz In
a
SMA 2.4 GHz input
50 Ω impedance -5 dBm to +10 dBm
6
2.4 GHz Out
a
SMA Output of 2.4 GHz frequency reference. A factory installed cable
connects the 2.4 GHz Out connector to the 2.4 GHz In.
This port is always on level is 7.3 dBm (nominal), if unused, this port
should be terminated with 50 Ω load.
7
19.2 GHz In
a
SMA 19.2 GHz input
50 Ω impedance -5 dBm to +10 dBm
8
19.2 GHz Out
a
SMA Output of 19.2 GHz frequency reference. A factory installed cable
connects the 19.2 GHz Out connector to the 19.2 GHz In.
This port is always on level is 7.3 dBm (nominal), if unused, this port
should be terminated with 50 Ω load.