Keysight M9484C Getting Started And Troubleshooting Manual Download Page 137

Page: 137 / 141

M9484C Startup Guide

137

Safety and Maintenance Information
Instrument Maintenance

Instrument Maintenance

Cleaning the instrument

To remove dirt or dust from the external case of the M9484C VXG, clean the
case using a dry or slightly-dampened cloth only.

Cleaning Connectors

Cleaning connectors with alcohol shall only be done with the instrument power
cord removed, and in a well-ventilated area. Allow all residual alcohol moisture
to evaporate, and the fumes to dissipate prior to energizing the instrument.

To prevent electrical shock, disconnect the instrument from mains

before cleaning. Use a dry cloth or one slightly dampened with

water to clean the external case parts. Do not attempt to clean

internally.

Summary of Contents for M9484C














































































































































Search results

Summary of Contents for M9484C

Reviews:

Related manuals for M9484C

Brands by name

Popular brands

Keysight M9484C, Getting Started And Troubleshooting Manual

Search results

Summary of Contents for M9484C

Reviews:

Related manuals for M9484C

Brands by name

Popular brands