Keysight M9484C, Getting Started And Troubleshooting Manual

Page: 26 / 141

26 M9484C Startup Guide
Front and Rear Panel Features
Front Panel Features
Front Panel Features
One Channel Instruments
One Channel, 6 GHz or 8.5 GHz
For M9484C Option 001and Option 506 or 508 only
Item Connector Type
Description
# Name
1 SS - USB 3.0 USB Type-A
female Host controller, SuperSpeed, 900 mA (nominal)
2 USB-C PD USB Type-C
female Reserved for future use. The front panel USB 3.0 Type C connectors
do not have USB-compliant pin configurations. Do not use these
ports for any USB devices as damage may occur.
3
19.2 GHz In
a
SMA 19.2 GHz input
50 Ω impedance -5 dBm to +10 dBm
4
19.2 GHz Out
a
SMA Output of 19.2 GHz frequency reference. A factory installed cable
connects the top left 19.2 GHz Out connector to the 19.2 GHz In.
This port is always on level is 7.3 dBm (nominal), if unused, this port
should be terminated with 50 Ω load.
5 19.2 GHz Out SMA Output of 19.2 GHz frequency reference. The top right 19.2 GHz Out
connector is switchable and off by default.
6 19.2 GHz Out SMA Output of 19.2 GHz frequency reference. The two bottom
19.2 GHz Out connectors have a factory installed 50 Ω termination.
This port is always on level is 7.3 dBm (nominal), if unused, this port
should be terminated with 50 Ω load.
7 On/Off Switch Push Button Power Switch