Keysight M8920A, Getting Started Manual

Page: 29 / 93

Step 3 -Install the Software
M8920A Getting Started Guide 29
The progress on the installation is displayed.
During the installation process, some prompt boxes will pop up. If
any FPGA versions installed on the installed module are different
then what is required by the current modular TRX, the FPGA on
that module will be updated. If this is the case, power off the
chassis and then power on to for these updates to take effect.
The installation takes approximately 20 to 30 minutes to complete.
11. Once the installation is complete, restart the controller before using the
application.
If the installation fails, a dialog box will display the possible
root causes. Follow the instructions to fix the issue and