Keysight M8920A, Getting Started Manual

Page: 22 / 93

Step 3 -Install the Software
Power Up the Controller
If you are using a remote controller and have installed the
interface cable, you must power up the chassis BEFORE you
power up the PC. When you power down your chassis, Shut Down
the PC BEFORE you power down the chassis.
If you are using an embedded controller, complete the following steps:
1. Install the embedded controller module into the compatible chassis. The
Keysight M9037A PXIe embedded controller and Keysight M9010A chassis for
benchtop or Keysight M9018B PXIe chassis for rack mount are recommended.
Please refer to the embedded controller and chassis documentation for further
details.
2. Connect peripherals (mouse, keyboard, monitor).
3. Power up the chassis.
22 M8920A Getting Started Guide