52
Getting Started Guide
3
Test Set Operating System
8
Install License File in
Target Instrument
a
With the target instrument running, insert
the USB flash drive into one of the front
panel USB ports. After a few minutes,
you should see a message saying
"Successful License Installation"
b
Cycle power on the target instrument.
c
Once the test set has re-booted, the
application should be ready to use on the
target instrument.
The Agilent License Services running on
the target instrument looks for *.lic files
whenever it detects a USB device has
been inserted. If the contents of the *.lic
file are appropriate for the instrument,
the license will be installed
automatically.
Newly-installed licenses are only
recognized by the instrument software
on power-up.
Step
Action
Notes
