Keysight Agilent X-Series Getting Started Manual Download Page 14

Page: 14 / 119

Quick-Start

Getting Started Guide

Launch Microsoft Setup
Wizard

•

Highlight Microsoft
Windows and press

Enter

to start the pre-installed
operating system.

The analyzer performs the following steps:

•

Windows Startup window

•

Black screen

•

Windows blue please wait message window, “Please wait while windows prepares
to setup”

•

Blue Agilent window

•

The following Welcome window appears giving you information about the End-
User License Agreement.

•

At this time, it is safe to turn off the instrument before initializing the software.

After launching the setup, do not turn off the instrument or remove power before the
Setup Wizard completes and the system restarts. Turning off the instrument may corrupt
the system and the application may not operate.

Reboot and logon

Click

•

When the instrument restarts, the following message
window appears:

Steps

Actions

Notes

Summary of Contents for Agilent X-Series
























































































































Search results

Summary of Contents for Agilent X-Series

Reviews:

Related manuals for Agilent X-Series

Brands by name

Popular brands

Keysight Agilent X-Series, Getting Started Manual

Search results

Summary of Contents for Agilent X-Series

Reviews:

Related manuals for Agilent X-Series

Brands by name

Popular brands