Keysight 1000B Series, User Manual

Page: 78 / 148

78 Keysight 1000B Series Oscilloscopes User’s Guide
3
Capturing Data
Recording/Playing-back Waveforms
You can record waveforms from input channels or from the mask test output, with
a maximum acquisition depth of 1000 frames.
The ability to record mask test output is especially useful for capturing abnormal
waveforms over a long period of time.
To record waveforms
To record waveforms:
1 Press [Acquire] .
2 In the Acquire menu, press Sequence .
3 In the Sequence menu, press Mode .
4 Continue pressing the Mode softkey or turn the entry knob to select Record.
To select the source channel for recording
1 In the Sequence menu ( [Acquire] > Sequence > Mode=Record ), press Source .
2 Continue pressing the Source softkey or turn the entry knob to select the
desired input channel or the mask test output.
To specify the mask test output, see “To set the mask test output condition” on
page 130.
To select the number of frames to record
1 In the Sequence menu ( [Acquire] > Sequence > Mode=Record ), press End Frame .
2 Turn the entry knob to select a number from 1 to 1000.
To start/stop recording
1 In the Sequence menu ( [Acquire] > Sequence > Mode=Record ), press Operate to
start or stop recording.
Appears on the menu when not recording; press Operate to start
recording.
Appears on the menu when recording; press Operate to stop
recording.