Keysight 1000B Series User Manual Download Page 117

Page: 117 / 148

Saving, Recalling, and Printing Data

Keysight 1000B Series Oscilloscopes User’s Guide

117

To switch between files, path, and directory panes

In the Disk Mana. menu (

[Save/Recall]

Disk Mana.

), press

Explorer

to switch

between:

In each of these panes, the entry knob is used to select items.

To navigate the directory hierarchy

In the directory pane (see

“To switch between files, path, and directory panes”

page 117):
• Turn the entry knob to select folders.
• Push the entry knob to navigate into the selected folder.

To create new folders

In the Disk Mana. menu (

[Save/Recall]

Disk Mana.

), press

New Folder

Use the folder/file naming dialog to enter the folder name. See

“To edit

folder/file names”

on page 118.

In the New Folder menu, press

Save

Files

Places the cursor in the files pane.

Path

Places the cursor in the path pane.

Directories

Places the cursor in the directories pane.

Summary of Contents for 1000B Series





















































































































































Search results

Summary of Contents for 1000B Series

Reviews:

Related manuals for 1000B Series

Brands by name

Popular brands

Keysight 1000B Series, User Manual

Search results

Summary of Contents for 1000B Series

Reviews:

Related manuals for 1000B Series

Brands by name

Popular brands