Keysight 1000B Series User Manual Download Page 110

Page: 110 / 148

110

Keysight 1000B Series Oscilloscopes User’s Guide

Making Measurements

Press

Cursor B

, and continue pressing the softkey or turn the entry knob to

select the channel on which to make the measurement (or “None” to turn off

the cursor).

To adjust the cursors:

•

Press

CurA

and turn the entry knob to adjust the “A” cursor.

•

Press

CurB

and turn the entry knob to adjust the “B” cursor.

The A cursor values displayed are:
• A->X
• A->Y.

The B cursor values displayed are:
• B->X.
• B->Y

If both A and B cursors are used, these values are also displayed:
•

X — difference between CurA and CurB time values.

• 1/

X — shows the frequency associated with the time value difference.

•

Y — difference between CurA and CurB amplitude values.

To display cursors for automatic measurements

Press

[Cursors]

In the Cursors menu, press

Mode

Continue pressing the

Mode

softkey or turn the entry knob to select “Auto”.

In the “Auto” cursors mode:
• Cursors appear for the most recently displayed automatic measurement (see

“To display an automatic measurement”

on page 97).

• No cursors are displayed if there are no automatic measurements.

Summary of Contents for 1000B Series





















































































































































Search results

Summary of Contents for 1000B Series

Reviews:

Related manuals for 1000B Series

Brands by name

Popular brands

Keysight 1000B Series, User Manual

Search results

Summary of Contents for 1000B Series

Reviews:

Related manuals for 1000B Series

Brands by name

Popular brands