Keysight Technologies U3042AM04, User'S And Service Manual

Page: 74 / 88

Table 2 0
U3042AM04
Service Information
Cable Connections
The RF flex cables will be connect to the designated test set front panel ports and
an uncorrected response trace should resemble the figures indicated in
Table 2 0 .
RF Signal Path Insertion Loss (S21)
RF Path Description Signal Insertion Loss (typical)
Source IN to Ports 5-8 Source Figure 5 1 on page 68
RCVR OUT to Ports 5-8 Receiver Figure 52 on page 68
Source IN to CPLR THRU Source Figure 53 on page 68
RCVR OUT to CPLR ARM Receiver Figure 53 on page 68
Table 2 1
Source Signal Path Insertion Loss Test
Connect the RF Flex cables to the Test Port and Source IN port indicated in Table 2 1 .
T he expected results should be similar to Figure 5 1 on page 68 .
Source Signal Path Test Instructions
Path #
RF Path
Description Control Mode
<Address>.<Data>
Path Components
Insertion Loss
(typical)
1
Source IN to Port 5
1
1. Use the Source IN port associated with this group of test ports.
0.1 P5 CPLR, S10 Figure 51 on page 6 8
2 Source IN to Port 6 16.1 P6 CPLR, S20 Figure 51 on page 6 8
3 Source IN to Port 7 32.1 P7 CPLR, S30 Figure 51 on page 6 8
4 Source IN to Port 8 64.1 P8 CPLR, S40 Figure 51 on page 6 8
67 Keysight U3042AM04 User's and Service Guide