U3042AM04
System Setup with
N5230A/C and N5232A/B
7. Place the analyzer on top of the Test Set and ensure that the front frame of the
analyzer is positioned slightly forward of the locks that are attached to the Test
Set. Slide the analyzer back so the locks engage the front frame of the analyzer.
8. Secure the analyzer’s lower locking feet to the Test Set’s upper locking feet using
the spring–loaded screws on the locking feet. If the analyzer's lower locking feet
are not aligned with the screw holes in the Test Set's upper locking feet, loosen
the screws securing the feet to the instrument slightly to align and tighten.
Figure
9
Locking the Analyzer
Figure
10
Locking Feet Screws
The lock-feet kit (U3021-60001) includes the analyzer and Test Set lock-feet. Refer
to
for ordering information.
•
PNA - 5023-0132 (Kit includes locking feet and screws)
•
Test Set - 5063-9253 (Kit includes lock links, locking feet and screws)
Test Set
Front Frame
Network Analyzer
Front Frame
Slide the network Analyzer
back to engage the lock link
in the back of the network
analyzer's front frame
Lock Link
screw
Slide the network analyzer
back to engage the lock link in
the back of the network
analyzer’s front frame,
Keysight U3042AM04 User's and Service Guide
14
