Figure 2
6
Trace Measure S-Parameter
S-Parameter selection can be accomplished using Response > Measure. Use the drop-
down menu to select 1 of 64 S-Parameters for the 8-Port system, see
Figure 2
7
. The
first number in the Sxx selection is the Receiver Port and the second number will be
the Source Port. Any port can be selected to be the Receiver, Source, or both, as in
S11. The front panel R LED indicates the port is the Receiver and the S LED indicates
the port is the Source.
The 'B' model analyzer provides an S-Parameter selection method using the keypad.
For example, to select S25: MEAS [MEAS] > Enter S-Parameters > [2][.][5] [Enter].
S-Parameter
Measure
ment
('A' Model Analyzers Only)
Figure
27
New Trace Measure S-Parameter
Multiple S-Parameters can be made from selecting
Trace/Chan > Trace > New Trace
-OR-
(Instrument > Trace > New Trace)
. Use the drop-down menu and select any of the
64 S-Parameters.
New Trace Measure
Keysight U3042AM04 User's and Service Guide
28
U3042AM04
Controlling the Test Set with
N5222/32/42A/B
