Getting Started Guide 99
Test Set Operating System
Transporting a License Between Test Sets
7.
Save License File to
USB Flash Drive
Follow these steps:
1.
The KSM Transportation Web page
will indicate that a license file is
available and display two links to
the license file. Right-click on the
license file and select Save Target
As…
2.
Save the license file to the root
level of the USB flash drive,
keeping the ".lic" file extension.
3.
Close the Save dialog and exit the
KSM Transportation Web page.
Either link can be used to either display or
save the license file.
The license file must be saved to the root
level of the USB flash drive for it to be
recognized by the target instrument.
8.
Install License File in
Target Instrument
Follow these steps:
1.
With the target instrument
running, insert the USB flash
drive into one of the front panel
USB ports. After a few minutes,
you should see a message saying
"Successful License Installation".
2.
Cycle power on the target
instrument.
3.
Once the test set has re-booted,
the application should be ready
to use on the target instrument.
The Keysight License Services running on
the target instrument looks for *.lic files
whenever it detects a USB device has been
inserted. If the contents of the *.lic file are
appropriate for the instrument, the license
will be installed automatically.
Newly-installed licenses are only
recognized by the instrument software on
power-up.
Step
Action
Notes