Getting Started Guide 77
Operating Tasks
Port Configuration
In the example below, broadcast mode is set up for ports RFIO 1, 2, 3, and 4.
(These ports are grouped above the diagonal line on the TRX front panel.) It
would be also be possible to use ports RFIO 1 and 2, or ports RFIO 3 and 4.
Figure 5-20
Example: broadcast mode (ports 1 - 4)
Set up the RF Output using this command:
:FEED:RF:PORT:OUTP:BROadcast P1234
Broadcast mode is set up only by means of SCPI commands, not by making
menu selections.
