72 Getting Started Guide
Operating Tasks
Port Configuration
Configuration Example (Tx 7, Rx 4)
Setting up RFIO 7 for transmit, RFIO 4 for receive.
Figure 5-15
Example: Tx 7, Rx 4
Set up the RF Input using this menu setting or its equivalent command:
Input/Output > Input > RF Input Port > RFIO 4
Command:
:FEED:RF:PORT:INP RFIO4
Then set up the RF Output using this menu setting or its equivalent command:
Input/Output > RF Source > RF Output > RFIO 7
Command:
:FEED:RF:PORT:OUTP RFIO7