Keysight Technologies S8780A Getting Started Manual Download Page 109

Page: 109 / 117

Getting Started Guide 109

Test Set Operating System
System Maintenance

Instrument software installation

If you downloaded the instrument software update file to the instrument via

LAN, access that file from the location that it was stored and proceed to step 1.
If you downloaded the instrument software update file to a USB storage

device, plug that into one of the USB ports on the front of the instrument.

Access the file for the removable drive, then proceed to step 1.

This installation may involve updating of FPGA devices within the E6680A.

During the installation, DO NOT power off the E6680A for ANY reason!

Interrupting the FPGA update process can place the instrument in an unusable

state, requiring it to be returned to Keysight for repair.

Step

Notes

Double-click on the

installer file, and click

"Yes" in the

confirmation window

that appears.

The installer is an executable file with a name in the format:

E6680A_Installer_A.xx.xx_Self-Extractor.exe

A window appears

showing the

extraction of the

software installer.

A confirmation window will ask for your permission to continue the installation process after

the installer has been extracted.

Summary of Contents for S8780A






















































































































Search results

Summary of Contents for S8780A

Reviews:

Related manuals for S8780A

Brands by name

Popular brands

Keysight Technologies S8780A, Getting Started Manual

Search results

Summary of Contents for S8780A

Reviews:

Related manuals for S8780A

Brands by name

Popular brands