Keysight Technologies PD1000A, Operating Manual

Page: 27 / 44

Keysight PD1000A Test Fixture Operating Guide 27
Inserting Cal Standards into the PD1000A TO-220/TO-247 Test Fixtures
Inserting Cal Standards into the PD1000A TO-220/TO-247 Test
Fixtures
Inserting Calibration Standards into the Test Fixtures is the same as inserting
your device to be tested. This section shows the orientation of the Calibration
Standards inserted into the Test Fixture.
Input Standards
Two pins on each OPEN , SHORT , and 50
Ω
LOAD Calibration Standards. The
Calibration Standards connects between the Gate and Source/Emitter.
Important: Notice the orientation of each standard.
Figure 13 Inserting the Input OPEN , SHORT , LOAD Standards into the Test Fixture