Keysight Technologies N5261A, User'S And Service Manual

Page: 9 / 99

Keysight N5261/62A User’s & Service Guide 3
Installation & System Operation
Description
The N5261/62A Millimeter Head Controller was designed for use with the
N52xx Network Analyzer family and banded millimeter-wave system solutions.
Banded millimeter-wave systems are made up of three types of major
components: a PNA or PNA-X, a controller test set, and millimeter-wave
heads. These components are generally purchased separately and assembled
into a system at the customer's site.
Table 1-4 on page 13 and Table 1-5 on page 14 lists compatible PNA and
PNA-X models with required options. Table 1-9 on page 21 and Table 1-10 on
page 21 list available millimeter-wave modules. Typical system configurations
are pictured in Figure 1-1 on page 2 and Figure 1-2 on page 2 .
The N5261A or N5262A Millimeter Head Controller may also be used as part of
the N5251A broadband analyzer system. This application is not discussed in
this manual. Refer to N5251-90001 for N5251A system information.
In this document the N5261A and N5262A will be referred to as the test set.
This manual should be used in conjunction with the following documents:
— PNA-X Series Network Analyzer On-line Help System
— Millimeter-wave Technical Overview 5989-7620EN
— OML Millimeter-wave modules (N5256-90001)
— VDI Millimeter-wave modules (N5256-90002)
— N5251A Installation and Service Guide (N5251-90001)
Verifying Your Shipment
To verify the contents shipped with your product, refer to the “Box Content
List” included with the shipment. For a list of option components, refer to Table
1-6 on page 16 .
Inspect the shipping container. If the container or packing material is
damaged, it should be kept until the contents of the shipment have been
checked mechanically and electrically. If there is physical damage refer to
“Contacting Keysight” on page
9 2
. Keep the damaged shipping materials (if
any) for inspection by the carrier and a Keysight Technologies representative.
The N5261/62A Millimeter Head Controller and the millimeter-wave modules
are sensitive to electrostatic discharge (ESD). Ground your work station
before unpacking and installing the millimeter-wave modules. See
“Electrostatic Discharge Protection” on page 9 1 .