Keysight Technologies N5261A, User'S And Service Manual, Page: 31 / 99

Keysight N5261/62A User’s & Service Guide 25
Installation & System Operation
Figure 1-10 Rear Bottom Feet
3. Install the two rear locking feet from the (5023-0132) onto the analyzer,
where the standoffs were removed.
Figure 1-11 Install Locking Feet on Network Analyzer
4. Remove the top two standoffs from the rear panel on the test set.
5. Install the two rear locking feet from the kit (U3021-60002) onto the test
set using two screws (0515-2317), included in shipment. Looking at the
rear panel, the N5242-20139 is the left foot and the N5242-20138 is the
right foot.
Standoffs (x2)
Feet (x4)
Locking Foot
from
K
it
(5023-0132)