Keysight Technologies N5261A, User'S And Service Manual

Page: 43 / 99

Keysight N5261/62A User’s & Service Guide 37
Installation & System Operation
The following detailed instructions are for connecting an OML T/R module.
These instructions assume a cable dress kit (black sleeving) is available. Modify
the instructions appropriately for other types of modules.
1. Prepare the cable bundle comprised of five cables listed in Table 1-13 .
a. Complete Steps 1 through 5 of the Installation Guide from the
Millimeter-wave Cable Dress Kit (document number N5260-90070
contained in kit part number N5261-60019). DO NOT APPLY THE
VELCRO ASSEMBLIES AT THIS TIME.
2. Connect the five cables to the front panel of the controller in the following
order. Use two right angle adapters (1260-2604).
Figure 1-25 Controller Front Panel Connections
3. Repeat
step 1
and
step 2
for each module in the system.
Table 1-13 Controller Connections
Order Test Set Module (OML)
1 DC POWER +12 V
2 TEST IF Test I.F.
3 REF IF Ref I.F.
4 RF OUT R.F. In
5 LO OUT L.O. In