38
Keysight N5261/62A User’s & Service Guide
Installation & System Operation
1-
4.
Select a Millimeter-wave module and place it on the work surface in front
of the test set.
5.
Connect the bundle of cables to the module in the following order.
Figure 1-26
Test Head Module Connections
6.
Repeat
step 4
and
step 5
for the remaining modules.
7.
Apply Velcro assemblies to the ends of the cable sleeves.
a.
Complete steps 6, 7 and 8 of the Installation Guide from the
Millimeter-wave Cable Dress Kit (document number N5260-90070
contained in kit part number N5261-60019 and N5261-90020).
8.
Position each test head in the approximate location where it will be used
for measurement operations.
9.
Torque all RF connections to 8 in-lb.
Table 1-14
Millimeter Head Connections
Order
Module (OML)
1
+12 V
2
R.F In
3
L.O. In
4
Ref I.F.
5
Test I.F.
Summary of Contents for N5261A
