Keysight Technologies M9260A, Startup Manual

Page: 28 / 45

1 Inspection, Installation, and Verification
28 Keysight M9260A Startup Guide
Step 4: Install the Module
1 Ensure that the PXIe chassis power switch is at the Off (Standby) position and
the chassis power cable is unplugged.
2 If the chassis has multiple fan speed settings, ensure that the fans are set to
automatic. Do not set the fan speed to low or turn it off.
3 Position the chassis so that there is ample space between the chassis fan
intake and exhaust vents. Blockage by walls or obstructions affect the air flow
needed for cooling. (Refer to the chassis documentation for more information
about cooling).
CAUTION
– The PXIe hardware does not support “hot-swapping” capabilities
(changing modules while power is applied to the chassis).
– Before installing the M9260A module into the chassis, ensure that the
chassis is powered off and unplugged to prevent damage to the module.
NOTE
The M9260A module can be used in a chassis with a PXIe or PXI-H chassis
peripheral slot.
The module can be installed in any PXIe slot marked with a peripheral slot
compatibility image (a solid circle containing the slot number).
The module can also be installed in any hybrid PXI slot marked with a
peripheral slot compatibility image (the letter “H” and a solid circle containing
the slot number).