Keysight Technologies M9260A, Startup Manual

Page: 19 / 45

Inspection, Installation, and Verification 1
Keysight M9260A Startup Guide 19
Step 1: Unpack and Inspect the Module
ESD precaution
Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
The following are the recommended ESD accessories and can be purchased from
your local supplier.
– Conductive table mat with wrist-strap combination.
– Conductive floor mat with heel-strap combination.
Both types, when used together, provide a significant level of ESD protection. Of
the two, only the table mat with wrist-strap combination provides adequate ESD
protection when used alone. To ensure user safety, the static-safe accessories
must provide at least 1
Ω
of isolation from ground.
Figure 1-1 shows an example of a static-safe work station using both types of ESD
protection: conductive table mat with wrist-strap combination, and conductive
floor mat with heel-strap combination.
CAUTION
The M9260A PXIe Audio Analyzer is shipped in materials which prevent
damage from static. The module should only be removed from the packaging
in an anti-static area after ensuring that correct anti-static precautions are
taken. Store all modules in anti-static envelopes when not in use.