Keysight Technologies M9260A, Startup Manual

Page: 24 / 45

1 Inspection, Installation, and Verification
24 Keysight M9260A Startup Guide
Step 3: Install the Controller and Software
System requirements
The following table lists the minimum system requirements for Keysight IO
Libraries Suite and controllers. In general, any x86 or x64 (except Itanium)
architecture should work but there may be a significant decrease in performance if
the processor speed is below the minimum requirements.
Table 1-1 System requirements
Operating system
Windows
®
7 SP1 (32 or 64-bit) or higher
Processor speed
– 1.5 GHz (x86 and x64) or higher
– Itanium 64 is not supported
Available memory 2 GB minimum
Available hard-disk
space
[a]
2 GB available hard-disk space
Display Resolution 1024
×
768
Input Device Mouse or a compatible pointing device
Browser
Microsoft
®
Internet Explorer 7 or greater
Chassis A PXIe or PXI-H chassis peripheral slot
Embedded Controller
A Keysight embedded controller running one of the above operating systems.
Note: The embedded controller must be compatible with the Keysight chassis.
Remote Controller
A desktop/laptop PC running one of the above operating systems and a Keysight interface cable
(e.g. Y1202) with PCIe (desktop) or ExpressCard (laptop) interface card.
[a] Because of the installation procedures, less memory may be required for the operation than is required for the
installation.