Keysight Technologies M9260A, Startup Manual

Page: 25 / 45

Inspection, Installation, and Verification 1
Keysight M9260A Startup Guide 25
Set up the controller
The following steps describe setting up the remote controller:
1 Install a compatible PCIe adapter in the PC.
2 Connect your I/O peripherals (mouse, keyboard, and monitor) to the PC.
3 Connect a compatible interface cable (e.g. Keysight Y1202) from the PC to the
PXIe chassis.
4 Power up the PXIe chassis.
5 Power up the PC and install the PCIe adapter drivers.
The following steps describe setting up the embedded controller:
1 Install the embedded controller module into a compatible PXIe chassis.
2 Connect your I/O peripherals (mouse, keyboard, and monitor) to the
embedded controller module.
3 Power up the PXIe chassis.
CAUTION
– During startup, power up the chassis before you power up the PC.
– During shutdown, power down the PC before you power down the
chassis.
NOTE
Do not install the M9260A module in the PXIe chassis yet. The software must be
installed first to allow the Keysight IO Libraries Connection Expert software to
detect the M9260A module.