Viewing Error Messages
The Err annunciator in the lower right corner indicates messages in the error queue.
Press
[Error]
to view errors in the error queue. You can also use the SCPI SYSTem:ERRor? query to view error
messages.
Errors in the error queue are stored and retrieved on a first-in, first-out basis. Once an error has been read, either by
remote command or from the front panel, it is cleared. The only exception is self-test errors, which cannot be
cleared until the underlying condition is corrected.
If no errors are in the error queue, "No errors" appears when you press
[Error]
.
See
for a list of error messages.
88
Keysight AC6800 Series Operating and Service Guide