Configuring Instrument Preferences
Press
[Menu] > System > Preferences
to configure the display and to lock and unlock the instrument.
Configure the Screen Saver
Press
[Menu] > System > Preferences > Display > Saver
to configure the screen saver.
–
Screen saver
– enables the screen saver function.
–
Saver delay
– specifies the time in minutes between the last time any communication occurs with the instrument
or a key is pressed until the screen saver goes into effect.
–
Wake on I/O
– restores the display whenever any I/O interface activity occurs.
SCPI:
Specify the Startup Meter View
1.
Press
[Menu] > System > Preferences > Display > View
to select the instrument's initial meter view.
2.
Press
[Select]
and use the up and down arrows to highlight your selection.
3.
Press
[Select]
to confirm your selection and then press
[Meter]
to exit. This setting does not change the current
meter view; it only changes upon cycling power. For example, the image below shows the starting meter view
with
Volt, Curr, Power
selected.
Keysight AC6800 Series Operating and Service Guide
81
