Page 4
The KD-MSA8x8PRO can be configured to work in 5 separate Modes.
These modes can only be set through the RS-232 command ‘SPO xx T y’.
(see RS232 commands detailed on page 12)
NOTE: The default configuration type is 1.
Type 1
= Left & Right Analog Inputs to Left & Right Analog Outputs with Audio Control plus PCM
Inputs to PCM Outputs in pass through (switching only). Any Audio type can be passed through
PCM in this mode.
Type 2
= Left & Right Analog Inputs to Left & Right Analog Outputs switching with Audio Control
plus Composite Video Inputs to Composite Video Outputs (switching only).
Type 3
= Left & Right Analog Inputs to Both Left & Right Analog Outputs and PCM Outputs. All
have switching and Audio Control.
Type 4
= PCM Inputs to Both Left & Right Analog Outputs and PCM Outputs. Both signals will
switch, only Analog Outputs will have Audio Control. PCM Outputs will be in pass through mode.
Any Audio type can be passed through PCM in this mode.
Type 5
= PCM Inputs to Both Left & Right Analog Outputs and PCM Outputs with full audio
control. PCM Audio will be converted to Analog and processed for control. Will not pass
multichannel audio; Dolby Digital, DTS etc. in this mode.
Connections, LEDs and Button Map
Rear Panel Connections:
All connections to the KD-MSA8X8Pro are found on the rear panel of the unit. Refer to the
illustrations below for port assignments while making connections
Power Connection
Serial IR
IR Eye
RS-232 Port
Operation Mode Switch
8X Audio Inputs
8X Audio Outputs
Analog Stereo Audio
L
R
PCM/CVBS
Analog Stereo Audio
L
R
PCM/CVBS
Input Connections
½
Audio Input
»
L/R Analog
»
PCM Digital Coaxial Audio
½
Composite (CVBS) Video Input on PCM port (if not used)
