Page 11
KD-MSA8x8Pro IR Remote Commands:
Below are listed some of the most common remote commands.
»
Output Number
=
01-08
»
Input Number
=
01-08
»
Numeric Keypad Value
=
(00-99)
»
Arrows Up/Down
»
Power On
=
Power On
»
Power Off
=
Power Off
»
For a complete listing of all remote commands, please visit the Key Digital website at
www.keydigital.com
Switching and Mute Commands
PCM (or CV Video) & Analog Audio Switch
»
To switch Both PCM (or CV Video) along with Analog Audio: Press R1, enter the desired
Output number, press R3, then enter the desired Input number.
»
Example:
To switch Output 2 with Audio to Input 4 press;
’R1-02-R3-04’
PCM (or CV Video) Switch
»
To switch PCM (or CV Video) Only: Press R1, enter the desired Output number, press
‘Video Mode’, then enter the desired Input number.
»
Example:
To switch Output 2 Video to Input 4 press;
’R1-02-VideoMode-04’
Analog Audio Switch
»
To switch Analog Audio ONLY: Press R1, enter the desired Output number, press ‘
Audio Mode’, then enter the desired Input number.
»
Example:
To switch Output 2 Audio to Input 4 press;
’R1-02-AudioMode-04’
Mute PCM (or CV Video) & Analog Audio ALL
»
To Mute both PCM (or CV Video) and Audio on ALL Outputs: Select
‘R1-All Mute’
Mute PCM (or CV Video) ALL
»
To Mute ALL Video Outputs: Select
‘R1-Video Mode – All Mute’
Mute Analog Audio ALL
»
To Mute ALL Audio Outputs: Select
‘R1-Audio Mute – All Mute’
Un-Mute PCM (or CV Video) & Analog Audio ALL
»
To Un-Mute BOTH Video and Audio on ALL Outputs: Select
‘R1-All Restore’
Un-Mute PCM (or CV Video) ALL
»
To Un-Mute ALL Video Outputs: Select
‘R1-Video Mode – All Restore’
Un-Mute Analog Audio ALL
»
To Un-Mute ALL Audio Outputs: Select
‘R1-Audio Mode – All Restore’
