background image

Page 17

Important Product Warnings:

1. 

Connect all cables before providing power to the unit.

2. 

Test for proper operation before securing unit behind walls or in hard to access spaces.

3. 

If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support 
with bolts or sheet-rock anchors.

Safety Instructions.

 

Please be sure to follow these instructions for safe operation of your unit.

1. 

Read and follow all instructions.

2. 

Heed all warnings.

3. 

Do not use this device near water.

4. 

Clean only with dry cloth.

5. 

Install in accordance with the manufacturer’s instructions.

6. 

Do not install near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat.

7. 

Only use attachments/accessories specified by the manufacturer.

8. 

Refer all servicing to qualified service personnel. Servicing is required when the device has 
been damaged in any way including:

 

»

Damage to the power supply or power plug

 

»

Exposure to rain or moisture

You MUST use the Power Supply provided with your unit or you VOID  
the Key Digital

®

 Warranty and risk damage to your unit and associated equipment.

Summary of Contents for FatBOY KD-MSA8X8Pro





















Reviews: