Page 14
»
Type 3
= Left & Right Analog Inputs to Both Left & Right Analog Outputs and PCM
Outputs. All have switching and Audio Control.
»
Type 4
= PCM Inputs to Both Left & Right Analog Outputs and PCM Outputs. Both
signals will switch, only Analog Outputs will have Audio Control. PCM Outputs will be in
pass through mode (switching only and any Audio type can be passed through PCM in
this mode).
»
Type 5
= PCM Inputs to Both Left & Right Analog Outputs and PCM Outputs with full
audio control. PCM Audio will be converted to Analog and processed for control.
(Will not pass multichannel audio; Dolby Digital, DTS etc. in this mode.)
»
Example:
To set Audio Type to 1 for Output 3, issue the command;
‘SPO03T1’
»
Example:
To set Audio Type to 5 for All Outputs, issue the command;
‘SPOAT5’
To set Analog Audio Output Volume:
»
‘SP O xx AV yy’
To set the Analog Audio Output Volume level:
»
Where xx = ‘01-99’ and is the Output number and yy = ‘00-99’ and is the Volume level.
»
Example:
To set Analog Audio Volume of Output 3 to 50, issue the command;
‘SPO03AV50’
To Mute Output - Analog Audio Only:
»
‘SP O xx A E/D/T’
To Mute the Analog Audio Output for a specific Output;
»
Where xx = ‘01-99’ and is the Output number and
‘E’
is for Audio Mute Enabled,
‘D’
is for
Audio Mute Disabled and
‘T’
is to toggle between Enabled and Disabled.
»
Example:
To Enable Audio Mute for Output 3, issue the command;
‘SPO03AE’
To Mute Output – PCM (or CV Video) & Audio:
»
‘SP O xx AVM E/D/T’
To Mute the PCM (or CV Video) & Audio Output for a specific Output;
»
Where xx = ‘01-99’ and is the Output number and
‘E’
is for Video & Audio Mute Enabled,
‘D’
is for Video & Audio Mute Disabled and
‘T’
is to toggle between Enabled and Disabled.
»
Example:
To Enable Video & Audio Mute for Output 3, issue the command;
‘SPO03AVME’
To switch PCM (or CV Video) and Audio together:
»
‘SP O xx S yy’
To route the desired Input to the desired Output with Audio:
»
Where xx = ‘01-99’ and is the Output number and yy = ‘01-99’ and is the Input number.
»
Example:
To route Input 3 with audio to Output 5 issue the command;
‘SPO05S03’
To switch PCM (or CV Video) only:
»
‘SP O xx SI yy’
To route the desired PCM (or CV Video) Only Input to the desired Output:
»
Where xx = 01-99 and is the Output number and yy = 01-99 and is the Input number.
»
Example:
To route Input 3 to Output 5 issue the command; “
SPO05SI03’
To switch Analog Audio only:
»
‘SP O xx SA yy’
To route the desired Analog Audio Only Input to the desired Output:
»
Where xx = 01-99 and is the Output number and yy = 01-99 and is the Input number
»
Example:
To route Audio Input 3 to Output 5 issue the command; “
SPO05SA03’
