Page 16
Specifications
Technical:
»
Input (Each):
Left and Right Analog Line Level Audio on two (2) RCA connectors
(2VRMS/10kohm)
»
Input (Each):
Composite Video or PCM Audio on one (1) RCA female (1Vpp/75
Ω
).
»
Output (Each):
Left and Right Analog Line Level Audio on two (2) RCA connectors
(2VRMS/10kohm)
»
Output (Each):
Composite Video or PCM Audio on one (1) RCA female (1Vpp/75
Ω
).
Does not support Dolby Digital or DTS digital audio over PCM
»
Max Video Input Level:
Composite Video or PCM: 1.2Vpp on 75
Ω
, AC coupling;
»
Return Loss:
-19dB
»
Max Video Output Level:
Composite Video or PCM: 1.5Vpp on 75
Ω
, DC coupling
»
Resolution:
480i/60 or 576i/50
»
Audio Rates:
48kHz sampling rate for Analog Stereo Audio; Supports Normal (up to 96 kHz)
or Bypass mode in PCM
»
Matrix Switching:
Full independent matrix switching of Video and Audio
»
Video S/N Ratio:
58dB RMS un-weighted; 65 dB RMS @ 5MHz weighted, optimal EQ
»
K-Factor:
0.22% @ optimal EQ
»
Video Isolation (Crosstalk):
-45dB @ 5MHz
»
Analog Audio Max Input Level:
4dBu on 50k
Ω
, AC coupling
»
Analog Audio Max Output Level:
4dBu on 150k
Ω
, DC coupling
»
Audio Bandwidth:
20Hz to 20kHz @ 0dBu
»
TND + Noise:
0.33% @0dBu @ 1kHz
»
PCM Max Input Level:
1Vpp on 75
Ω
, AC coupling
»
PCM Max Output Level:
1Vpp on 75
Ω
, DC coupling
»
Control:
Front panel push buttons and LED’s, front and rear Infrared Receiver, Wired IR on
rear, RS-232 on Tx and Rx lines. Supports both RS232 (Baud Rate at 57600bps) and Serial
IR (at 38kHz)
»
Control Connections:
DB9 connector for RS232; Two (2) IR receive sensors at Front and
Rear for Remote Control; 3.5mm Mono Phone Jack for Serial IR (input only)
»
Power:
+6V, 6.6A
General:
»
Regulation:
CE, RoHS, WEEE
»
Rack Mount:
1U, 1 Rack Width (rack ears included)
»
Enclosure:
Black Metal
»
Product Dimensions:
L = 17.5” W = 7” H = 1.75”
»
Shipping Carton Dimensions:
L = 23.5” W = 11” H = 4.5”
»
Product Weight:
6 lb
»
Shipping Weight:
9
»
Accessories:
IR Remote, UL Certified Power Supply
