MY20K03-2_1.0_18.07.2019
78
Operation
6.16.3.4
eShift with NuVinci H|Sync/enviolo
with Optimized H|Sync
Only applies to pedelecs with this equipment
NUVINCI CADENCE mode allows you to
reduce or increase the desired pedalling
frequency using the
plus button
or
minus button
on the operating unit.
If you hold the
plus button
or
minus button
down,
you can increase or reduce the pedalling
frequency in increments of five. The desired
pedalling frequency is shown on the display
screen.
NUVINCI GEAR mode allows you to switch
between several specified transmissions using
the
plus button
or
minus button
on the control
panel. The selected transmission (gear) is shown
on the display screen.
6.16.3.5
eShift with Rohloff E-14 Speedhub
500/14
Only applies to pedelecs with this equipment
The new gear is shown briefly on the display
screen each time it is changed.
Since the drive unit detects the gear shift and
consequently reduces motor assistance briefly, it
is also possible to switch gears under load or on
hills.
If the pedelec is brought to a halt from a speed
greater than 10 km/h, the system can
automatically switch back to a pre-set START
GEAR.
You can set the START GEAR in the system
settings.
