MY20K03-2_1.0_18.07.2019
65
Operation
6.13.3 Display
You operate the display screen using the left-hand
assistance lever and the buttons on the screen.
Figure 69: Control panel overview
1
Long assistance lever
2
Short assistance lever
3
Button
6.13.4 Using the riding light
The riding light is either constantly on or
constantly off. The setting is changed in the
system settings.
6.13.5 Using the push assist system
The push assist helps the rider to push the
pedelec. The speed can be a maximum of 6 km/h
in this case. The tractive power of the push assist
and its speed can be influenced by the selection
of gear. We recommend using first gear for cycling
uphill to protect the drive.
6.13.5.1
Select WALK level of assistance
Push the
long assistance lever
for a long time.
The level of assistance WALK is displayed.
If a warning is sounded during switchover, it is
impossible to switch to the WALK level of
assistance. This may be due to the current
speed not being 0 km/h, pressure being
applied to the pedals or similar.
Release the
long assistance lever
.
6.13.5.2
Switching on the push assist
Push the
long assistance lever
to switch on the
push assist system.
Switching off the push assist
Release the
long assistance lever
to switch off
the push assist system.
Crash caused by distraction
A lack of concentration while riding increases the
risk of an accident. This may cause a crash with
serious injuries.
Never allow yourself to be distracted by the
display.
Stop pedelec if you want to make inputs on the
display other than a change in level of
assistance. Only enter data when the bicycle
is stationary.
Notice
Do not use the display as a handle. You may
irreparably damage the display if you use it to
lift the pedelec.
CAUTION
!
1
2
3
I
II
III
Injury caused by pedals
The pedals turn when using the push assist due
to the system design.
You must steer the pedelec securely with both
hands when using push assist.
Allow for enough freedom of movement for the
pedals.
CAUTION
!
