MY20K03-2_1.0_18.07.2019
63
Operation
The LED light on the charger has three statuses:
You can check the battery level by looking at
the LEDs on the battery. The LED statuses are
lit (
), non-lit (
) and flashing (
).
You can check the current charging status by
pressing the battery's On-Off switch.
The charging process is complete when the
LEDs on the operating status and battery level
indicator go out.
Status
Meaning
Lit
The charger is recharging the
battery.
Flashing
There is a charging error.
Switched off
Battery disconnected
Risk of fire and explosion caused by damaged
batteries
The safety electronics on damaged or faulty
batteries may fail. The residual voltage can cause
a short circuit. Batteries may self-ignite and
explode.
If the battery becomes deformed or begins to
smoke, keep at a safe distance, disconnect the
power supply at the socket, and notify the fire
service immediately.
Never extinguish damaged batteries with
water or allow them to come into contact with
water.
Notice
If an error occurs during the charging process,
a system message is displayed. Remove the
charger and battery from operation
immediately and follow the instructions.
CAUTION
!
100 - 81%
80 - 61%
60 - 41%
40 - 21%
20 - 1%
0% when the battery is not fitted
to the pedelec
0% when the battery is fitted to
the pedelec
Table 32: Charge level of the battery
