MY20K03-2_1.0_18.07.2019
41
Operation
6.2
Error messages
6.3
Battery error message
The battery indicates errors with different LED
statuses. The LED statuses are lit (
), non-lit
(
) and flashing (
).
Type
Status
Lighting pat-
tern
Remedy
System error
Communication error with
the bicycle system.
Check that the charging cable is firmly and properly connected.
Contact your specialist dealer if the problem persists.
Temperature protection
If the temperature exceeds
the guaranteed operating
range, the battery will switch
off.
Store battery in a cool place where there is no direct sunlight until
the battery interior temperature has fallen sufficiently.
Contact your specialist dealer if the problem persists.
Error during security
authentication
This is displayed if no
original drive unit is
connected. This is
displayed if one of the
cables is not connected.
Connect an original battery and an original drive unit.
Check the status of the cables.
Contact your specialist dealer if the problem persists.
Charge error
This is displayed if an error
occurs during the charging
process.
Remove the plug connector between the battery and charger.
Press the On-Off button when only the battery is connected.
Contact your specialist dealer if the problem persists.
Battery malfunction
Electrical fault in the battery.
Plug the charger into the battery.
Remove the charger.
Press the On-Off switch when the battery is connected.
Contact your specialist dealer if the problem persists.
Table 25: Battery error messages
