Kessel 84000S, Installation And Operating Manual

Page: 11 / 56

11
1. Safety Instructions
Dear Customer,
Before installing and commissioning
this KESSEL Staufix FKA, please tho-
roughly read through this manual and
follow all instructions!
Please make sure that nothing was da-
maged during the shipment of this item.
In case damage did occur during the
shipment please consult our service de-
partment.
Safety Instructions
During the installation, operation and
maintenance of this product, all applicable
safety measures including the correspon-
ding DIN and VDE norms and regulations
as well as any local or national electrical
safety precautions should be followed!
This system should not be installed or
operated in areas designated as explo-
sion risk areas. This system operated on
electrical currents and contains rotating
mechanical parts. Not following all of the
above safety regulations could result in
damage to the unit, injury or possible
death to the operator.
Before and service, maintenance or
repair work is done to the unit the
power must be disconnected!
It should be checked and confirmed that
electrical cables as well as all electrical
systems are in perfect operating conditi-
on. If any of these parts are damaged the
system should not be placed in operation.
If the system is already in operation then
it should be disconnected from the power
source and no longer operated.
In order to insure proper condition and
operation of the system, it should be in-
spected and maintained according to DIN
EN 13564.
We recommend that a service and main-
tenance contract is signed by a professi-
onal licensed service company.
During backwater or potential backwater
conditions no service or maintenance is to
be conducted on the system.
The backwater flaps as well as the emer-
gency backwater flap closure lever should
always have freely moveable and not be
blocked or obstructed in anyway.
Note:
VDE 0100, VDE 01107, IEC and local
EVU regulations (regulations of local
supplier) should be observed and fol-
lowed.
The control unit should not be instal-
led or operated in areas designated as
explosion risk areas.
The operator of this system should fol-
low all instruction in this manual as
well as manual number 016-003!
Table of contents
1. Safety instructions Page 11
2. General 2.1 Application Staufix FKA Page 12
2.2 Contents of delivery Page 12
2.3 Pre-installation tips Page 12
3. Installation 3.1 Concrete slab installation Page 13
3.2 Extended depth installation in conrete slab Page 14
3.3 Exposed pipe installation Page 14
3.4 Enstallation in moisture /Grondwater areas Page 14
4. Inspection and Maintenance 4.1 Inspection Page 16
4.2 Maintenance Page 16
4.2.1 Assembly of lockable cover Page 17
4.3 Operational check according to DIN EN 13564 Page 17
4.4 Optical probe check Page 18
4.5 Emergency closure valve function Page 18