KERN PLJ 1200-3A Operating Manual Download Page 31

Page: 31 / 75

ALJ/ALS/PLJ/PLS-BA-e-1135

8 Basic Operation

Start-up

In stand-by mode (see chap. 6.5) press ON/OFF button.
The balance is ready for weighing when the weight display
appears.

Switching Off

Press ON/OFF button, the balance returns to the stand-by
mode (see chap. 6.5).

Simple weighing



Place goods to be weighed on balance



Wait until the stability display appears [



]



Read weighing result.

Taring



Place the weighing box and press the

TARE

button.

„0-t“ is displayed.



After standstill control the zero display appears.

The weight of the container is now internally saved.



Weigh the material, the net weight will be indicated.

The weight of the weighing container will be displayed as a
minus number after removing the weighing container.

The tare weight is saved until it is deleted. Remove the load
from the balance and press the

TARE

button. „0-t“ is

displayed, wait until the zero display appears.

The tare procedure can be repeated as many times as
necessary, for example with initial weighing of several
components for a mix (add-on weighing). The limit is
reached when the total weighing range capacity is full.

Summary of Contents for PLJ 1200-3A












































































Search results

Summary of Contents for PLJ 1200-3A

Reviews:

Related manuals for PLJ 1200-3A

Brands by name

Popular brands

KERN PLJ 1200-3A, Operating Manual

Search results

Summary of Contents for PLJ 1200-3A

Reviews:

Related manuals for PLJ 1200-3A

Brands by name

Popular brands