KERN PLJ 1200-3A Operating Manual Download Page 53

Page: 53 / 75

ALJ/ALS/PLJ/PLS-BA-e-1135



The display for weight determination of the "sample in air“ appears.



Confirm by pressing the

PRINT

button.



If necessary, tare and put the sample.



Wait until the weight display of the weighing balance has become stable and

then press the

PRINT

button. „WEI AIR“ appears flashing.



The display for weight determination of the "sample in the measuring fluid“

appears.



Acknowledge using

PRINT

button



Immerse sample holder and tare by pressing the

TARE

-key



Place sample and immerse it

Make sure that the sample holder does not touch the beaker.



Wait until the weight display of the weighing balance has become stable and

then press the

PRINT

button. „WEI LIQ“ appears flashing.



The density of the sample is shown

Return to weighing mode



Press the

ON/OFF

key



or use the

MENU

button to start a new measuring cycle.

If at the density determination errors have appeared, „d-----„ is displayed.

Summary of Contents for PLJ 1200-3A












































































Search results

Summary of Contents for PLJ 1200-3A

Reviews:

Related manuals for PLJ 1200-3A

Brands by name

Popular brands

KERN PLJ 1200-3A, Operating Manual

Search results

Summary of Contents for PLJ 1200-3A

Reviews:

Related manuals for PLJ 1200-3A

Brands by name

Popular brands