KERN PLJ 1200-3A Operating Manual Download Page 58

Page: 58 / 75

ALJ/ALS/PLJ/PLS-BA-e-1135

10.4 Checkweighing

An upper and a lower limit value can be established to ensure that the weighed
goods are exactly within the established tolerance limits.
The display

[L]

[ok]

[H]

shows whether the goods to be weighed are within the

two tolerance limits.

Goods to be weighed below tolerance limit

Goods to be weighed within tolerance range

Goods to be weighed above tolerance limit

The indetermination if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal.



In weighing mode press

MENU

button. The first menu item „count“ is displayed.



Press

MENU

button repeatedly



Confirm using the

PRINT

button, the display to enter the lower tolerance limit

appears.



Enter the lower limit value using the arrow buttons









Confirm using the

PRINT

button, the display to enter the upper tolerance limit

appears.



Enter the upper limit value using the arrow buttons









Confirm using the

PRINT

button, the display to adjust the signal tone appears.

Summary of Contents for PLJ 1200-3A












































































Search results

Summary of Contents for PLJ 1200-3A

Reviews:

Related manuals for PLJ 1200-3A

Brands by name

Popular brands

KERN PLJ 1200-3A, Operating Manual

Search results

Summary of Contents for PLJ 1200-3A

Reviews:

Related manuals for PLJ 1200-3A

Brands by name

Popular brands